ADB Head Module

ADB and burner series are designed to be installed in all the applications requiring the heating of process air and its mixing with the combustion products.
These burners can be properly classified as “open-back air draught burners”; the most appreciated features of ADB burners are the extreme versatility and
the modular structure. ADB burner modules are available in two different configurations:

– LLD Low potentiality by surface unit 75 kW every 152 mm

– LD High potentiality by surface unit 150 kW every 152 mm
In order to allow the correct burner operation, the process air directly involved in the combustion is required to comply to the following specifics:

– Oxigen content ≥ 19%

– Speed of the air flow around the burner head between 10 and 20 m/s

The pressure drop generally created by these burners is about 2,5 mbar; the burners guarantee the same efficiency either in pressure or in suction condition.
The burner head structure is completely made in Nickel-Chrome alloys, allowing an upstream temperature ≤ 450°C and a downstream temperature ≤ 800°C
(≤ 200°C upstream and ≤ 450°C downstream in the standard version). Particular attention is finally dedicated to the maximum reduction of the CO content and of the NOx emissions.